Adding and Enrolling Devices

Adding devices

To add a new device, follow these steps:

1. Log on to the Seqrite mSuite console and in the left pane, click Devices.
2. On the Devices page, click Add Device available on the right-hand side. Click one of the following options.
   • Add: Click Add to add a device.
   • Import: Click Import to import a list of devices.

   The Add Device page is displayed.

3. Enter the Device Name and Ownership and then assign Owner and Group.
4. Click Save.

Enrolling a new Android device

After you add a device, you must enroll it, so you can start monitoring it. You can enroll a device for mSuite, Workspace, or both.

Enrolling of a device involves the following ways.

Enrollment via Email/SMS

In this process, the enrollment command is sent through email or SMS. You can select this option when the device is with the user.

To enroll a new device using SMS/Email, follow these steps:

1. Log on to the Seqrite mSuite console and in the left pane, click Devices.
2. On Devices list page, select a single or multiple devices.

   The Take Action list appears.

3. From the With selected list, select Enrollment Request > Enrollment via Email/SMS and then click Submit.

   The enrollment details dialog box is displayed.

After sending the enrollment request, the device user will receive the enrollment details (Company Code and OTP) using email and SMS. The user must tap the enrollment link on the device that will navigate the user to the enrollment page. The user must follow the instructions given on the enrollment page.

The user must download and install the Seqrite mSuite Agent along with inbuilt wakeup app and enter the Company Code and OTP in the given text box on the enrollment wizard.

4. Tap the Enroll button. The Activate Device Administrator page is displayed.
5. To activate the Device Administrator, tap Activate. The company code and OTP details will be validated. The device gets enrolled with the help of email/SMS.

   After completing the enrollment process, the enrollment request gets auto approved and all the mapped policy and configurations are applied on the device.

Enrollment via QR Code

Select this method of enrollment when you have the mobile devices with you and will be doing the enrollment on your own. Additionally, this QR code can also be sent to the user using email and the user can scan that QR Code to enroll the device.

To enroll a device using QR Code, follow these steps:

1. Log on to the Seqrite mSuite console and in the left pane, click Devices.
2. On Devices list page, select devices.
3. From the With selected list, select Enrollment Request > Enrollment via QR Code and then click Submit.

   The enrollment details dialog box is displayed with the company code, OTP, Enrollment URL, Owner Email, and Device ID information.

4. On the Enrollment Details screen of the device, tap the arrow available on the header of the enrollment wizard. The Scan QR Code option is displayed.
5. Tap the arrow next to the Scan QR Code option to scan the QR code on the device. The camera app opens.
6. Bring the device in front of the QR code available on the desktop and scan it.

   After the QR code is detected, the Activate Device Administrator screen is displayed.

7. To activate the Device Administrator, tap Activate. The QR code details will be validated.

   The device gets enrolled with the help of QR code.

Enrollment using ADO

ADO stands for Android device user. Seqrite mSuite requires Android Debug Bridge (ADB) to enable Device user Mode on the device. Thus, ADB helps to set a bridge between the computer and the connected device, and also perform multiple device actions, which in turn helps to set Seqrite mSuite as Android device user (ADO).

When enrolling with ADO:

• You must configure ADB on your computer.
• Your supported Android devices must be of 5.0 or later versions.

After the ADB is installed on your computer, connect your device having Seqrite mSuite installed on it and run the following command:

adb shell dpm set-device-owner com.seqrite.client/.components.receivers.MainDevice AdminReceiver

When you receive a success message, the device is considered as a Device user. Further, you can continue with the device enrollment process.

Using ADB assign device usership to Seqrite mSuite

To view how to enroll the device using ADB and make Seqrite mSuite as a device user, follow these steps:

1. Log on to the Seqrite mSuite console and in the left pane, click Devices.
2. On Devices list page, select devices.
3. From the With selected list, select Enrollment Request > Enroll only mSuite > Enrollment using ADO Enablement and then click Submit.

   A document is displayed with prerequisites and the complete process of making Seqrite mSuite the Device user.

Enrolling device with ADO enablement

To assign Seqrite mSuite Agent your device usership, you must follow these steps:

1. Do factory reset of your phone: Use a new device or factory reset your device. With factory reset, you will permanently delete your personal data. Make sure you take backup of your data. To factory reset your device, follow these steps:
   • On device, tap Settings > System > Reset. Please note that the terminology in your device may differ.
   • Tap Reset Phone.
2. Assign Seqrite mSuite Agent your device usership: Provision your device using QR code.
   • After factory reset of the device, a Welcome screen is displayed.
   • On the Welcome screen, tap 6 times below the word Welcome.
   • The setup wizard prompts you to connect to the Internet and download a QR code reader. In QR code setup screen, tap Next.
   • Choose the appropriate option to connect to the Internet.
   • After connecting to the Internet, the Google Play services downloads a module that contains a QR code recognition engine.
   • Click Accept & Continue to accept the Google terms and conditions and let the QR reader installation begin.
   • Open the email received from your Administrator and scan the QR code available in the email with your device. In the next screen, tap OK and then tap Next.

   The ADO enrollment process using QR code is completed.

3. Enroll Seqrite mSuite Agent
   • After assigning Seqrite mSuite Agent the device usership, you must follow the Seqrite mSuite enrollment process by tapping the Seqrite mSuite icon on the device. Further follow the instructions on the screen.

Enrollment Time Matrix

Note: *The time mentioned in the table is approximate timing and is subject to vary depending on multiple factors.

See also
Enrollment using Android Management API(Android Enterprise Enrollment)